High grade LLS bearing with class leading 100,000 hours MTBF
Equipped with a counter-pull magnet that reduces the axial tension on the bearing
Fan geometry optimized for a good balance between static pressure and maximum airflow, resulting in good performance in all usage scenarios
Aerodynamically shaped stator struts including the wire strut. Helps reduce noise and unwanted turbulence
Stator struts sit on a wide angle to the trailing edge of the blades which result in a lower noise level and smoother noise profile
Strategically placed notches near the fan hub on the trailing edge of the blades further reducing the humming noise produced when the blades pass the stator struts
A "trip wire" on the rear side of the blades near the leading edge. The trip wire introduces a larger turbulent boundary layer at an earlier stage, this delays the layer separation and improves both airflow and noise characteristics.
The customized design of the Dynamic Series fans contributes to a beautiful, cool build
Rotational Speed: 1200 RPM
Acoustical Noise: 19.4 dB (A)
Maximum Air Flow: 52.3 CFM
Maximum Pressure: 0.88 mm H2O
Actual Input Power: 1.32 W
Maximum Rated Input Current: 0.18 A
Nominal Input Voltage: 12 V
Minimum Startup Voltage: 4 V
Fan Size: 120mm
Connector: 3-pin fan header
Bearing: LLS
Number of Blades: 7
MTBF: 100,000 hours
Cable Length: 500 mm
Cable Type: White Ribbon Cable
Color: WhiteÂÂ
Dimensions: 120.0 x 120.0 x 25.0 mm
Weight: 119.0 g
Package Contents: Dynamic X2 Series fan; Screw pack with 4 metal fan screws