Specifications

  • Mfr Part Number: FSP600PSASK-B204
  • Features:
    • Complied with ATX12V standard
    • Active Power Factor Correction (PFC) meet EN61000-3-2
    • High efficiency and reliability
    • Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances)
    • Remote ON/OFF function
    • Internal 12V DC fan included
    • Noise Killer
    • AC input I/O switch is option
    • Low noise and ripple
    • Output over voltage, short circuit, and over current protection
    • 100% Hi-pot, ATE, and burn-in tested
    • Re-settable power shut down
    • Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
    • Approved by CB 62368 & 60950-1 2nd, EMC, CUL/UL TUV, FCC
  • Input:
    • Input Range: 90 ~ 264Vac (RMS), Full Range Input
    • Frequency: 47 ~ 63Hz
    • Input Current: Max 8A(RMS) @ 115Vac, 4A(RMS) @ 230Vac
    • Inrush Current: No damage at cold start
  • Output:
    • Total Watts: 600W
    • Output Voltage: +3.3V @ 25A, +5V @ 25A, +12V1 @ 16A, +12V2 @ 16A, +12V3 @ 16A, +12V4 @ 16A, -12V @ 0.5A, +5VSB @ 4.0A
    • +3.3V and +5V total output not exceed 150W
  • Dielectric Withstand: Primary frame ground 1800V AC for 2 second
  • Efficiency: Typical > 85%
  • Rise Time: Less than 20ms
  • Hold-up Time: 16ms minimum at nominal input voltage
  • Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
  • Leakage Current: Less than 3.5mA at 264Vac, 63Hz
  • MTBF: A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25°C
  • Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 86.0 mm
  • RoHS Compliant

Added On:2019-05-24 20:02:34  Updated on:2020-06-23 00:00:00

Similar Product:

New
New
New
New
New
New
New

Logo Brands & Clients